Differences

This shows you the differences between two versions of the page.

--- alsa_only_audio [2025/10/18 08:31] – ethan
+++ alsa_only_audio [2025/10/18 08:35] (current) – ethan
@@ Line 79: / Line 79: @@
 </file>
-====LDAC====
+you can use **bluealsa-cli** to get information on your Bluetooth devices.
-on Sony and other brand products which support it, LDAC provides a high bit depth and sample rate. BlueALSA supports LDAC, but some packages are built without it.
-on Arch Linux, the package in the AUR disables LDAC support so you must edit the PKGBUILD or compile it manually. uncomment/pass --enable-ldac.
-if wokring correctly, BlueALSA will automatically use LDAC on supported devices, and adjust the sample rate depending on the audio.
-playing 44100 Hz file:
 <code bash>
+$ bluealsa-cli list-pcms
+/org/bluealsa/hci1/dev_XX_XX_XX_XX_XX_XX/a2dpsrc/sink
 $ bluealsa-cli info -vv /org/bluealsa/hci1/dev_XX_XX_XX_XX_XX_XX/a2dpsrc/sink
 ...
@@ Line 100: / Line 96: @@
 ...
 </code>
+====LDAC====
+on Sony and other brand products which support it, LDAC is a codec which provides a high bit depth and sample rate. BlueALSA supports LDAC, but some packages are built without it.
+on Arch Linux, the package in the AUR disables LDAC support so you must edit the PKGBUILD or compile it manually. uncomment/pass --enable-ldac.
+if wokring correctly, BlueALSA will automatically use LDAC on supported devices, and adjust the sample rate depending on the audio.
 =====S/PDIF multichannel=====